Top of the page

Power Amp 2 x 2600w 4ohms, 2 x 1500w 8ohms 2 x 3745w 100V

Item No. CLH-6000C
High Efficient Install Power Amplifier The Crest Audio® CLh™ Series power amplifiers set a new standard for performance and efficiency for the contracting and installation market. CLh amplifiers feature an ultra-high efficiency amplifier output circuit that reduces weight while, increasing output po
Login for Dealer Pricing

Description

High Efficient Install Power Amplifier

The Crest Audio® CLh™ Series power amplifiers set a new standard for performance and efficiency for the contracting and installation market. CLh amplifiers feature an ultra-high efficiency amplifier output circuit that reduces weight while, increasing output power, reliability and thermal efficiency.

The Crest Audio CLh 6000C is a ultra-high efficiency, servo-controlled, class-D power amplifier that delivers high power through two channels to balanced outputs for the ultimate in common-mode noise cancellation. It is equipped with Power Factor Corrections for world markets where PFC is required. The CLh 3000C operates on 230V/50 Hz power to drive 100V constant voltage systems.

The CLh Series includes Crest Audio’s exclusive ACL™ (Active Clip Limiting), which automatically reduces gain at the onset of clipping to prevent amplifier and load damage; over-current protection; DC voltage; channel active and temperature warning. Additional features include a lightweight switch-mode power-supply, remote turn-on, sequential turn-on, and a switchable, built-in low-cut filter.

Features
  • Ultra-high efficiency, servo-controlled, class-D power amplifiers that deliver high power through two channels
  • CLh 6000C produces 3745 Watts per channel continuous at 100V
  • Crest Audio’s exclusive ACL (Active Clip Limiting)
  • Over-current protection
  • DC voltage
  • Channel Active and temperature warning
  • Light-weight switch-mode power supply
  • Remote turn-on
  • Sequential turn-on
  • Switchable, built-in low-cut filter
Specifications
  • Channels (Input): 2
  • Channels (Output): 2
  • Power per Channel @ 2 Ω: 3,745 W
  • Power per Channel @ 4 Ω: 2,600 W
  • Power per Channel @ 8 Ω: 1,500 W
  • Power per Channel @ 100V: 3,745 W
  • Topology: Class D
  • Minimum Load Impedance: 2.67 Ω
  • Frequency Response: -3 dB, 20 Hz – 25 kHz; ±0 dB
  • Input Connectors: 2 x 3-pin Euro Connector
  • Output Connectors: 2 x 2-pin Barrier Strips
  • Rack Mount (19"): Yes (2U)
  • Net Weight: 14.1 lbs (6.40 kg)
  • Product Height: 3.48" (88 mm)
  • Product Width: 19.00" (483 mm)
  • Product Depth: 20.30" (516 mm)
  • AC Power Input: 230VAC 50 Hz
  • SKU: 03608422

Product Details

Brand
Crest Audio
Product Group
CLh™
Product Category
Amplifier - Install
Item No. CLH-6000C

Power Amp 2 x 2600w 4ohms, 2 x 1500w 8ohms 2 x 3745w 100V

High Efficient Install Power Amplifier The Crest Audio® CLh™ Series power amplifiers set a new standard for performance and efficiency for the contracting and installation market. CLh amplifiers feature an ultra-high efficiency amplifier output circuit that reduces weight while, increasing output po
Login for Dealer Pricing
Click below for direct download from our manufacturers.

Description

High Efficient Install Power Amplifier

The Crest Audio® CLh™ Series power amplifiers set a new standard for performance and efficiency for the contracting and installation market. CLh amplifiers feature an ultra-high efficiency amplifier output circuit that reduces weight while, increasing output power, reliability and thermal efficiency.

The Crest Audio CLh 6000C is a ultra-high efficiency, servo-controlled, class-D power amplifier that delivers high power through two channels to balanced outputs for the ultimate in common-mode noise cancellation. It is equipped with Power Factor Corrections for world markets where PFC is required. The CLh 3000C operates on 230V/50 Hz power to drive 100V constant voltage systems.

The CLh Series includes Crest Audio’s exclusive ACL™ (Active Clip Limiting), which automatically reduces gain at the onset of clipping to prevent amplifier and load damage; over-current protection; DC voltage; channel active and temperature warning. Additional features include a lightweight switch-mode power-supply, remote turn-on, sequential turn-on, and a switchable, built-in low-cut filter.

Features
  • Ultra-high efficiency, servo-controlled, class-D power amplifiers that deliver high power through two channels
  • CLh 6000C produces 3745 Watts per channel continuous at 100V
  • Crest Audio’s exclusive ACL (Active Clip Limiting)
  • Over-current protection
  • DC voltage
  • Channel Active and temperature warning
  • Light-weight switch-mode power supply
  • Remote turn-on
  • Sequential turn-on
  • Switchable, built-in low-cut filter
Specifications
  • Channels (Input): 2
  • Channels (Output): 2
  • Power per Channel @ 2 Ω: 3,745 W
  • Power per Channel @ 4 Ω: 2,600 W
  • Power per Channel @ 8 Ω: 1,500 W
  • Power per Channel @ 100V: 3,745 W
  • Topology: Class D
  • Minimum Load Impedance: 2.67 Ω
  • Frequency Response: -3 dB, 20 Hz – 25 kHz; ±0 dB
  • Input Connectors: 2 x 3-pin Euro Connector
  • Output Connectors: 2 x 2-pin Barrier Strips
  • Rack Mount (19"): Yes (2U)
  • Net Weight: 14.1 lbs (6.40 kg)
  • Product Height: 3.48" (88 mm)
  • Product Width: 19.00" (483 mm)
  • Product Depth: 20.30" (516 mm)
  • AC Power Input: 230VAC 50 Hz
  • SKU: 03608422

Product Details

Brand
Crest Audio
Product Group
CLh™
Product Category
Amplifier - Install