Top of the page

d&b audiotechnik Y8 Loudspeaker NLT4F/M

Item No. Z0707.002
High performance 2-way passive line array loudspeaker The compact Y8 line array loudspeaker is designed for use in vertical columns. The 2-way passive design features two 8” drivers in a dipole arrangement and a centrally mounted 1.4” compression driver with a wave transformer. Sophisticated horn ge
Login for Dealer Pricing
Click below for direct download from our manufacturers.

Description

High performance 2-way passive line array loudspeaker

The compact Y8 line array loudspeaker is designed for use in vertical columns. The 2-way passive design features two 8” drivers in a dipole arrangement and a centrally mounted 1.4” compression driver with a wave transformer. Sophisticated horn geometry combined with the advanced bass-reflex port design delivers full bandwidth capabilities with an extended LF output. These high performance line array modules offer 80° horizontal directivity controlled down to 500 Hz. The mechanical and acoustical design enables vertical arrays of up to twenty four loudspeakers with vertical splay angles from 0° to 14° with a 1° resolution. It can be used in columns of purely Y8 loudspeakers or combined with Y12 and/or Y-SUB cabinets. The loudspeaker cabinet is constructed from marine plywood and has an impact and weather protected PCP (Polyurea Cabinet Protection) finish. The front of the loudspeaker cabinet is protected by a rigid metal grill backed by an acoustically transparent foam. Each side panel incorporates a handle while two additional recessed grips are provided at the rear. Three point rigging hardware is integrated into the loudspeaker enclosure.

Amplifiers

The following amplifiers can be used to drive the Y8:
  • Mobile: D20, D40, D80
  • Installation: 40D
Features
  • Components 2 x 8"/1.4"
  • Dispersion 80°
  • SPLmax 139 dB
  • Weight 20 kg / 44 lb
Specifications
System data
  • Frequency response (-5 dB standard): 54 Hz - 19 kHz
  • Frequency response (-5 dB CUT mode): 100 Hz - 19 kHz
  • Max. sound pressure [1]:
    with 10D: 134 dB
    with D20/30D: 137 dB
    with D40/D80/40D: 139 dB
  • Cabinets per amplifier channel: 2
Loudspeaker data
  • Configuration: High performance 2-way passive line array loudspeaker
  • Nominal impedance: 8 Ω
  • Power handling capacity (RMS/peak 10 ms): 400/1600 W
  • Nominal dispersion angle (horizontal): 80°
  • Splay angle settings: 0° - 14° (1° increment)
  • Components:
    2 x 8" driver with neodymium magnet
    1.4" exit compression driver
    passive crossover network
  • Connections: 2 x NLT4 F/M
Dimensions / weight
  • Dimensions (H x W x D): 257 x 630 x 375 mm / 10 x 24.8 x 14.8"
  • Weight: 20 kg / 44 lb
[1] 1 m, free field, SPL max peak test signal: pink noise with crest factor 4, one speaker driven

Product Details

Brand
d&b audiotechnik
Product Group
Y Series
Product Category
Loudspeakers - Line Array
Item No. Z0707.002

d&b audiotechnik Y8 Loudspeaker NLT4F/M

High performance 2-way passive line array loudspeaker The compact Y8 line array loudspeaker is designed for use in vertical columns. The 2-way passive design features two 8” drivers in a dipole arrangement and a centrally mounted 1.4” compression driver with a wave transformer. Sophisticated horn ge
Login for Dealer Pricing
Click below for direct download from our manufacturers.

Description

High performance 2-way passive line array loudspeaker

The compact Y8 line array loudspeaker is designed for use in vertical columns. The 2-way passive design features two 8” drivers in a dipole arrangement and a centrally mounted 1.4” compression driver with a wave transformer. Sophisticated horn geometry combined with the advanced bass-reflex port design delivers full bandwidth capabilities with an extended LF output. These high performance line array modules offer 80° horizontal directivity controlled down to 500 Hz. The mechanical and acoustical design enables vertical arrays of up to twenty four loudspeakers with vertical splay angles from 0° to 14° with a 1° resolution. It can be used in columns of purely Y8 loudspeakers or combined with Y12 and/or Y-SUB cabinets. The loudspeaker cabinet is constructed from marine plywood and has an impact and weather protected PCP (Polyurea Cabinet Protection) finish. The front of the loudspeaker cabinet is protected by a rigid metal grill backed by an acoustically transparent foam. Each side panel incorporates a handle while two additional recessed grips are provided at the rear. Three point rigging hardware is integrated into the loudspeaker enclosure.

Amplifiers

The following amplifiers can be used to drive the Y8:
  • Mobile: D20, D40, D80
  • Installation: 40D
Features
  • Components 2 x 8"/1.4"
  • Dispersion 80°
  • SPLmax 139 dB
  • Weight 20 kg / 44 lb
Specifications
System data
  • Frequency response (-5 dB standard): 54 Hz - 19 kHz
  • Frequency response (-5 dB CUT mode): 100 Hz - 19 kHz
  • Max. sound pressure [1]:
    with 10D: 134 dB
    with D20/30D: 137 dB
    with D40/D80/40D: 139 dB
  • Cabinets per amplifier channel: 2
Loudspeaker data
  • Configuration: High performance 2-way passive line array loudspeaker
  • Nominal impedance: 8 Ω
  • Power handling capacity (RMS/peak 10 ms): 400/1600 W
  • Nominal dispersion angle (horizontal): 80°
  • Splay angle settings: 0° - 14° (1° increment)
  • Components:
    2 x 8" driver with neodymium magnet
    1.4" exit compression driver
    passive crossover network
  • Connections: 2 x NLT4 F/M
Dimensions / weight
  • Dimensions (H x W x D): 257 x 630 x 375 mm / 10 x 24.8 x 14.8"
  • Weight: 20 kg / 44 lb
[1] 1 m, free field, SPL max peak test signal: pink noise with crest factor 4, one speaker driven

Product Details

Brand
d&b audiotechnik
Product Group
Y Series
Product Category
Loudspeakers - Line Array