Ethernet Digital Control Zone Mixer

The DCM1e is a new Ethernet version of the popular DCM1 Digital Control Zone Mixer. The addition of an ethernet port on the rear panel of the new DCM1e allows its own on-board web-server to be connected via an RJ-45 socket to an independent or existing switch or router.This feature means the new DCM1e can be configured and controlled remotely by any mobile device or PC connected to the same network.

Using the web browser of any mobile device Users have "limited installer defined" controls via simple and intuitive interface pages. Power Users are provided with additional installer defined controls, whilst Installers have administrator status via a password protected "Configuration Options" screen.

Multiple devices can connect and operate the DCM-1e concurrently, providing complete flexibility and control for up to eight separate zones, if required.

• Frequency Response: 20 Hz - 20k Hz ±1 dB
• Distortion: <0.05 %, 20 Hz - 20k Hz
• Sensitivity: 195 mV (-12 dBu) to 3.1 V (+12 dBu)
• Input Gain Control: 24 dB range
• Input Impedance: 47k Ω
• Headroom: >+10 dB
• Noise: -90 dB A weighted (0 dB gain)
• Equalisation: HF: ±14 dB/10k Hz, MID: ±14 dB/1200 Hz, LF: ±14 dB/50 Hz

• Frequency Response: 100 Hz / -3 dB(filter) to 20 kHz ±0.5dB
• Distortion: <0.05% 20 Hz-20k Hz
• Gain Range: 10 dB - 50 dB
• Input Impedance: >2k Ω (balanced)
• Phantom Power: +12 V (PCB jumper for on/off)
• Headroom: >20 dB
• Noise: -120 dB EIN 22 Hz - 22k Hz (150 Ω)
• Equalisation: HF: ±10 dB/5k Hz, LF: ±10 dB/100 Hz

• Balanced Zone Outputs: 775 mV (0 dBu)
• Minimum load impedance: 600 Ω
• Maximum output level: +10 dBu (2.6 V)

• External Supply Input: 100 V-240 V AC; 47-63 Hz; 1.35 A
• Power supply: +12 V, 3 A; -12 V 1 A

• Dimensions (w x h x d): 482.6 mm x 88 mm (2U) x 170 mm 19" x 31/2" 63/5"
• Dimensions (packed): 570 mm x 270 mm x 220 mm 22" x 11" x 9"
• Weight: 3.12 kg (7 lbs) net 4 kg (8.8 lbs) packed