Top of the page

inDESIGN 2 Channel Power Amp 2 x 1200w @8 2 x 1850w @4 Class H 2RU

Item No. iD-HC1200
2x 1200W 2-Channel Power Amplifier, 2RU The inDESIGN iD-HC power amplifier series is a high powered efficient 2 Stage, Class H amplifier design-built for demanding mobile live sound and permanent installation amplification applications. Each model features min. 4 ohms load, bridging @ 8 ohms, switch
Login for Dealer Pricing
Click below for direct download from our manufacturers.

Description

2x 1200W 2-Channel Power Amplifier, 2RU

The inDESIGN iD-HC power amplifier series is a high powered efficient 2 Stage, Class H amplifier design-built for demanding mobile live sound and permanent installation amplification applications.

Each model features min. 4 ohms load, bridging @ 8 ohms, switchable input sensitivity, soft start, DC protection, short circuit protection, clip limiter and thermal overload protection.

Maintenance is a breeze with removal – washable front filters via the front panel. The weight is due to large transformers – sorry about that... at least your amps will have a long service life!

Specifications
  • Number of Channels: 2
  • Power RMS Watts 8Ω Stereo: 1200W
  • Power RMS Watts 4Ω Stereo: 1850W
  • Power RMS Watts 8Ω Bridged: 3900W
  • Amplifier Topology Category: 2 STAGE, CLASS H
  • Frequency Response: 20Hz - 20kHz
  • THD: 0.08%
  • S/N Rate: >108dB
  • Slew Rate: >20V/μs
  • Damping Factor: 300 (100Hz)
  • Input Connections:
    2x XLR3F
    PIN2 = HOT (+)
    PIN3 = COLD (-)
    PIN3 = GROUND
  • Signal Link Connection:
    2x XLR3M
    PIN2 = HOT (+)
    PIN3 = COLD (-)
    PIN3 = GROUND 
  • Input Impedance (unbal/bal): 10kΩ / 20kΩ 
  • Input Sensitivity VAC: 0.77V / 1V / 1.44V 
  • Output Connections & Wiring:
    SPEAKON NL4 x2
    CH1 +1/-1 STEREO MODE
    CH2 +1/-1 STEREO MODE
    CH1 +1/-1 INPUT LINK MODE
    CH2 +1/-1 INPUT LINK MODE
    CH1 +1/+2 BRIDGE MODE
    CH2 NOT CONNECTED IN BRIDGE MODE
  • Voltage Gain: 38dB
  • Cooling Flow: Front to Rear (via dual thermo controlled fans)
  • Protection: Soft Start, DC Protection, Short Circuit, Clip Limiter, Thermal Overload
  • Mains Power Requirements: 230V/50Hz +/- 10%
  • Mains Power Connection: 15 AMP PLUG / attached cable
  • Power Consumption RMS @ Stereo 4Ω:
    AH/Watts @ Idle: 0.17A / 39.1W
    AH/Watts @ 1/8th Power: 2.9A / 667W
    AH/Watts @ 1/3rd Power: 7.5A / 1725W
    AH/Watts @ Full Power: 14.3A / 3289W 
  • Product Dimensions (2RU) WxDxH : 483 x 456 x 88 mm 
  • Product Weight: 25.6kg 
  • Carton Dimensions WxDxH: 570 x 560 x 145 mm 
  • Gross Weight: 28kg
* Disclaimer: Instructions and specifications are correct at time of printing. Information within may be subject to change without notice.

Product Details

Brand
inDESIGN
Product Group
HC Series
Product Category
Amplifier - Install
Item No. iD-HC1200

inDESIGN 2 Channel Power Amp 2 x 1200w @8 2 x 1850w @4 Class H 2RU

2x 1200W 2-Channel Power Amplifier, 2RU The inDESIGN iD-HC power amplifier series is a high powered efficient 2 Stage, Class H amplifier design-built for demanding mobile live sound and permanent installation amplification applications. Each model features min. 4 ohms load, bridging @ 8 ohms, switch
Login for Dealer Pricing
Click below for direct download from our manufacturers.

Description

2x 1200W 2-Channel Power Amplifier, 2RU

The inDESIGN iD-HC power amplifier series is a high powered efficient 2 Stage, Class H amplifier design-built for demanding mobile live sound and permanent installation amplification applications.

Each model features min. 4 ohms load, bridging @ 8 ohms, switchable input sensitivity, soft start, DC protection, short circuit protection, clip limiter and thermal overload protection.

Maintenance is a breeze with removal – washable front filters via the front panel. The weight is due to large transformers – sorry about that... at least your amps will have a long service life!

Specifications
  • Number of Channels: 2
  • Power RMS Watts 8Ω Stereo: 1200W
  • Power RMS Watts 4Ω Stereo: 1850W
  • Power RMS Watts 8Ω Bridged: 3900W
  • Amplifier Topology Category: 2 STAGE, CLASS H
  • Frequency Response: 20Hz - 20kHz
  • THD: 0.08%
  • S/N Rate: >108dB
  • Slew Rate: >20V/μs
  • Damping Factor: 300 (100Hz)
  • Input Connections:
    2x XLR3F
    PIN2 = HOT (+)
    PIN3 = COLD (-)
    PIN3 = GROUND
  • Signal Link Connection:
    2x XLR3M
    PIN2 = HOT (+)
    PIN3 = COLD (-)
    PIN3 = GROUND 
  • Input Impedance (unbal/bal): 10kΩ / 20kΩ 
  • Input Sensitivity VAC: 0.77V / 1V / 1.44V 
  • Output Connections & Wiring:
    SPEAKON NL4 x2
    CH1 +1/-1 STEREO MODE
    CH2 +1/-1 STEREO MODE
    CH1 +1/-1 INPUT LINK MODE
    CH2 +1/-1 INPUT LINK MODE
    CH1 +1/+2 BRIDGE MODE
    CH2 NOT CONNECTED IN BRIDGE MODE
  • Voltage Gain: 38dB
  • Cooling Flow: Front to Rear (via dual thermo controlled fans)
  • Protection: Soft Start, DC Protection, Short Circuit, Clip Limiter, Thermal Overload
  • Mains Power Requirements: 230V/50Hz +/- 10%
  • Mains Power Connection: 15 AMP PLUG / attached cable
  • Power Consumption RMS @ Stereo 4Ω:
    AH/Watts @ Idle: 0.17A / 39.1W
    AH/Watts @ 1/8th Power: 2.9A / 667W
    AH/Watts @ 1/3rd Power: 7.5A / 1725W
    AH/Watts @ Full Power: 14.3A / 3289W 
  • Product Dimensions (2RU) WxDxH : 483 x 456 x 88 mm 
  • Product Weight: 25.6kg 
  • Carton Dimensions WxDxH: 570 x 560 x 145 mm 
  • Gross Weight: 28kg
* Disclaimer: Instructions and specifications are correct at time of printing. Information within may be subject to change without notice.

Product Details

Brand
inDESIGN
Product Group
HC Series
Product Category
Amplifier - Install