Network Wall Remote Control To complement our pema and ne Series amplifiers and DSP processors, we offer three network remote control options.Remote control your system from any location. The neWR-5 wall remote control fits in standard wall boxes. White faceplates can be covered with a standard decora plate (not included). The device has two Up/Down buttons for volume level, preset selection, etc. A two-character alphanumeric display gives the operator a visual indication that verifies the desired changes have been accepted by the system. Six programmable function select buttons with LEDs can each be programmed for one of the following functions:

• Preset Recall - Immediately recall an assigned preset
• Preset Scroll - Allows user to select any of the allowed presets via the up/down arrow button shown by the alphanumerical display
• Gain Control - Allows volume control of assigned inputs/matrix mix/outputs
• Channel Mute - Allows mute control of assigned inputs/outputs
• Zone Source Selection - Allows for on/off control of assigned inputs, but only for a specific output
• Logic High or Low for the ne24.24M processor

The neWR-5 is a programmable ethernet based remote control unit for Ashly NE Series products. Connecting and powering the neWR-5 is done using standard Cat-5 ethernet cable and an IEEE 802.3af Power over Ethernet (PoE) switch, hub, or inline injector (purchased separately). If PoE is not available, a 15-48VDC power supply can be hardwired directly to each unit (2 watts needed per unit). A hardwired Lock-Out feature on the neWR-5 will render all buttons inactive.