Top of the page

d&b audiotechnik V12 Loudspeaker NL4

Item No. Z0516.001
High performance 3-way passive line array loudspeaker The V12 is a 3-way passive design housing 2 x 10" LF drivers, one hornloaded 8" MF driver and two 1.4" exit HF compression drivers with 2.5" voicecoils mounted to a dedicated waveshaping device. The symmetrical dipolar arrangement of the neodymiu
Login for Dealer Pricing
Click below for direct download from our manufacturers.

Description

High performance 3-way passive line array loudspeaker

The V12 is a 3-way passive design housing 2 x 10" LF drivers, one hornloaded 8" MF driver and two 1.4" exit HF compression drivers with 2.5" voicecoils mounted to a dedicated waveshaping device. The symmetrical dipolar arrangement of the neodymium LF drivers around the centrally mounted coaxial MF and HF components allows a smooth overlap of the adjacent frequency bands in the crossover design. This results in an exceptional 120° horizontal constant directivity dispersion control nominally being maintained down to 250 Hz. The mechanical and acoustical design enables flown vertical arrays of up to twenty four loudspeakers. It can be used in columns of purely V12 loudspeakers or combined with V8s and / or with V-SUBs. The cabinet is constructed from marine plywood and has an impact and weather protected PCP (Polyurea Cabinet Protection) finish. The front of the loudspeaker cabinet is protected by a rigid metal grill backed by an acoustically transparent foam. Each side panel incorporates a handle, while two additional recessed grips are provided at the rear bottom of the cabinet.

Amplifiers

The following amplifiers can be used to drive the V12:
  • Mobile: D20, D40, D80
  • Installation: 40D
Features
  • Components 2 x 10"/1 x 8"/2 x 1.4"
  • Dispersion 120°
  • SPLmax 142 dB
  • Weight 34 kg / 75 lb
Specifications
System data
  • Frequency response (-5 dB standard): 67 Hz - 18 kHz
  • Frequency response (-5 dB CUT mode): 100 Hz - 18 kHz
  • Max. sound pressure [1]:
    with D20/30D: 139 dB
    with D40/D80/40D: 142 dB
  • Cabinets per amplifier channel: 2
Loudspeaker data
  • Configuration: High performance 3-way passive line array loudspeaker
  • Nominal impedance: 8 Ω
  • Power handling capacity (RMS/peak 10 ms): 500/2000 W
  • Nominal dispersion angle (horizontal): 120° [2]
  • Splay angle settings: 0° - 14° (1° increment)
  • Components:
    2 x 10" driver / 1 x 8" driver
    2 x 1.4" exit compression driver
    passive crossover network
  • Connections: 2 x NL4
Dimensions / weight
  • Dimensions (H x W x D): 310 x 700 x 460 mm / 12.2 x 27.5 x 18"
  • Weight: 34 kg / 75 lb
[1] 1 m, free field, SPL max peak, test signal: pink noise with crest factor 4, one speaker driven
[2] ≥ 250 Hz

Product Details

Brand
d&b audiotechnik
Product Group
V Series
Product Category
Loudspeakers - Line Array
Item No. Z0516.001

d&b audiotechnik V12 Loudspeaker NL4

High performance 3-way passive line array loudspeaker The V12 is a 3-way passive design housing 2 x 10" LF drivers, one hornloaded 8" MF driver and two 1.4" exit HF compression drivers with 2.5" voicecoils mounted to a dedicated waveshaping device. The symmetrical dipolar arrangement of the neodymiu
Login for Dealer Pricing
Click below for direct download from our manufacturers.

Description

High performance 3-way passive line array loudspeaker

The V12 is a 3-way passive design housing 2 x 10" LF drivers, one hornloaded 8" MF driver and two 1.4" exit HF compression drivers with 2.5" voicecoils mounted to a dedicated waveshaping device. The symmetrical dipolar arrangement of the neodymium LF drivers around the centrally mounted coaxial MF and HF components allows a smooth overlap of the adjacent frequency bands in the crossover design. This results in an exceptional 120° horizontal constant directivity dispersion control nominally being maintained down to 250 Hz. The mechanical and acoustical design enables flown vertical arrays of up to twenty four loudspeakers. It can be used in columns of purely V12 loudspeakers or combined with V8s and / or with V-SUBs. The cabinet is constructed from marine plywood and has an impact and weather protected PCP (Polyurea Cabinet Protection) finish. The front of the loudspeaker cabinet is protected by a rigid metal grill backed by an acoustically transparent foam. Each side panel incorporates a handle, while two additional recessed grips are provided at the rear bottom of the cabinet.

Amplifiers

The following amplifiers can be used to drive the V12:
  • Mobile: D20, D40, D80
  • Installation: 40D
Features
  • Components 2 x 10"/1 x 8"/2 x 1.4"
  • Dispersion 120°
  • SPLmax 142 dB
  • Weight 34 kg / 75 lb
Specifications
System data
  • Frequency response (-5 dB standard): 67 Hz - 18 kHz
  • Frequency response (-5 dB CUT mode): 100 Hz - 18 kHz
  • Max. sound pressure [1]:
    with D20/30D: 139 dB
    with D40/D80/40D: 142 dB
  • Cabinets per amplifier channel: 2
Loudspeaker data
  • Configuration: High performance 3-way passive line array loudspeaker
  • Nominal impedance: 8 Ω
  • Power handling capacity (RMS/peak 10 ms): 500/2000 W
  • Nominal dispersion angle (horizontal): 120° [2]
  • Splay angle settings: 0° - 14° (1° increment)
  • Components:
    2 x 10" driver / 1 x 8" driver
    2 x 1.4" exit compression driver
    passive crossover network
  • Connections: 2 x NL4
Dimensions / weight
  • Dimensions (H x W x D): 310 x 700 x 460 mm / 12.2 x 27.5 x 18"
  • Weight: 34 kg / 75 lb
[1] 1 m, free field, SPL max peak, test signal: pink noise with crest factor 4, one speaker driven
[2] ≥ 250 Hz

Product Details

Brand
d&b audiotechnik
Product Group
V Series
Product Category
Loudspeakers - Line Array