Installation specific medium format 2-way augmented array loudspeaker

The ALi60 is the installation variant of the AL60 augmented array loudspeaker for medium scale sound reinforcement. When the AL Flying frame top is used, up to four cabinet modules can be flown in vertical columns producing a 60 constant directivity dispersion pattern in the horizontal plane. The ALi60 can also be applied as horizontal array of maximum four loudspeakers using the AL Flying adapter. The ALi60 loudspeaker module is a passive 2-Way design housing two x 10"" neodymium LF drivers and one 1.4"" exit HF compression driver with 3"" diaphragms mounted to a dedicated wave shaping device and a passive crossover network. The wave segments of each cabinet couple without gaps and sum up coherently. Variable splay angles between adjacent cabinets can be set in a range of +/- 10 in 5 increments resulting in a total coverage of 50 up to 70 for two cabinets, up to a maximum of 150per array. All components are arranged symmetrically around the centre axis of the cabinet to produce a perfect symmetrical dispersion pattern. Broadband horizontal dispersion control is maintained down to approximately 550 Hz. The cabinet enclosure is constructed from marine plywood with an impact resistant black paint finish. The front of the loudspeaker cabinet is protected by a rigid metal grill backed by an acoustically transparent fabric. Three M10 threaded inserts are incorporated in one side panel to allow the secure attachment of a dedicated flying adapter.

Amplifiers

The d&b D20 and 30D amplifier can both be used to drive the ALi60.

Features

• Components: 2 x 10″ LF driver, 1 x 1.4” exit compression driver with 3″ coil
• Dispersion: 60° x 30°
• SPLmax: 139 dB
• Weight: 22 kg / 48.5 lb

Specifications

System data

• Frequency response (-5 dB standard): 60 Hz – 18 kHz
• Frequency response (-5 dB CUT mode): 105 Hz – 18 kHz
• Max. sound pressure [1]
  with D20/30D: 138 dB
  with D80: 139 dB
• Cabinets per amplifier channel: 2

Loudspeaker data

• Nominal dispersion angle (h x v – horizontal setup): 60 ° x 30 °
• Nominal impedance: 8 ohms
• Power handling capacity (RMS/peak 10 ms): 400/1800 W
• Splay angle settings: 20 … 40° (5° increment)
• Components:
  2 x 10″ LF driver
  1 x 1.4″ exit compression driver with 3″ coil
  Passive crossover network
• Connections: Phoenix socket

Dimensions / weight

• Dimensions (H x W x D): 322 x 700 x 356 mm (12.7 x 27.6 x 14″)
• Weight: 22 kg (48.5 lb)

[1] 1m, free field, SPL max peak test signal: pink noise with crest factor 4