2-Way Stage Monitor

The 2-way passive MAX2 loudspeaker houses a 15” LF driver and a coaxially mounted 1.4” HF compression driver and achieves 75° conical constant directivity dispersion. The driver arrangement uses a single magnet assembly, allowing for a compact cabinet design with a low profile for strict visual demands. The MAX2 provides a broad variety of deployment possibilities, whether used individually as a stage monitor; as a stand-alone full range system or, when combined with d&b subwoofers, as a drumfill. The loudspeaker cabinet is constructed in marine plywood with an impact resistant paint finish. Four M10 threaded inserts allow connection to a flying bracket. The cabinet incorporates a pair of recessed grips for handling, while the front is protected by a rigid metal grill backed with an acoustically transparent foam. A pole mount is incorporated into one of the side panels. Two runners recessed in the bottom panel protect the cabinet from scratching and prevents movement.

Amplifiers

The d&b D20 and 30D amplifiers are recommended to drive the MAX2. The d&b D80, 10D and D6 can also be used.

Features

• Components 15″/1.4″
• Dispersion 75°
• SPLmax 135 dB
• Weight 23 kg / 50 lb

Specifications

System data

• Frequency response (-5 dB standard): 55 Hz - 20 kHz [1]
• Max. sound pressure [2]:
  with 10D 131 dB
  with D20/30D 135 dB
  with D40/D80/40D 135 dB
• Cabinets per amplifier channel: 2

Loudspeaker data

• Configuration: 2-way stage monitor
• Nominal impedance: 8 Ω
• Power handling capacity (RMS/peak 10 ms): 250/1600 W
• Nominal dispersion angle (h x v): 75°
• Components:
  15" driver with ferrite magnet
  coaxial 1.4" exit compression driver
  passive crossover network
• Connections: 2 x NLT4 F/M
  

Dimensions / weight

• Dimensions (H x W x D): 354 x 580 x 496 mm [3] / 14 x 22.8 x 19.5" [3]
• Weight: 23 kg / 50 lb

[1] with floor coupling
[2] 1 m, free field, SPL max peak test signal: pink noise with crest factor 4, one speaker driven
[3] overall dimensions (projected footprint)