Installation specific high performance full range 2-way loudspeaker 

The 24S is a high performance full range 2-way passive loudspeaker housing two 12” drivers in a bass-reflex enclosure with a 1.4” exit compression driver mounted onto a large rotatable CD horn, intended for a wide range of permanently installed applications. The dipolar arrangement of the 12” drivers results in directivity control down to approximately 500 Hz in the same plane as the dipole. The specially designed ports with optimised flow characteristics and a large cabinet volume provide a significant low frequency reproduction. With a frequency response extending from 55 Hz to 18 kHz, the 24S can be used as a stand-alone, full range system, or supplemented with d&b subwoofers. It can be ground stacked or flown individually. The rotatable HF horn can be rotated by 90° to enable horizontal orientation. The loudspeaker cabinet is constructed from marine plywood, and has an impact resistant paint finish. The front of the loudspeaker cabinet is protected by a rigid metal grill. The top, bottom and both side panels each incorporate a pair of M10 threaded inserts for attaching d&b rigging hardware. The loudspeakers are Ball Impact Resistant according to DIN 18032-3 for sports and multipurpose halls. The Weather Resistant (WR) option provides an IP55 rating that enables the operation of loudspeakers in changing ambient conditions, and features a fixed cable.

Amplifiers

The following amplifiers can be used to drive the 24S:

• Mobile: D20, D40, D80
• Installation: 30D, 40D

Features

• Components 2 x 12"/1.4" 
• Dispersion   75° x 45°
• SPLmax 138 dB
• Weight 33 kg / 73 lb

Specifications

• Frequency response (-5 dB standard): 55 Hz - 18 kHz
• Frequency response (-5 dB CUT mode): 90 Hz - 18 kHz
• Max. sound pressure [1]:
• with D20/30D: 138 dB
• with D40/D80/40D: 138 dB
• Cabinets per amplifier channel: 1

• Configuration: Installation specific high performance full range 2-way loudspeaker
• Nominal impedance: 4 Ω
• Power handling capacity (RMS/peak 10 ms): 500/2000 W
• Nominal dispersion angle (h x v): 75° x 45° rotatable
• Components:
  2 x 12“ driver with neodymium magnet
  1.4” exit compression driver
  Passive crossover network
• Connections: 1 x NL4
  1 x screw terminal block

• Dimensions (H x W x D): 800 x 410 x 420 mm / 31.5 x 16 x 16.5”
• Weight: 33 kg / 73 lb