BMA 240 - 100V Mixer Amplifier

The inDESIGN BMA 240 is a high quality mixer amplifier for commercial and industrial audio applications.The BMA series feature 4 Mic/line inputs. Microphone input 1 features a mute so that a Microphone on this channel will mute all other inputs, useful for paging announcements. The BMA Series provide either 4 Ohm or constant voltage 100V speaker outputs. A pre-amp out/power amp in link allows for the mixer audio signal to be sent to an external equaliser or a booster amplifier. Shipped with a link fitted.The mixer amplifiers are part of inDESIGN's Install Series, which also includes mixers and power amplifiers. These units provide excellent features and value.

Specifications

• Output power: 240W
• AC power supply: 230VAC - 240VAC
• Output low impedance: 4 ohm - 8 ohm
• Hi impedance output:70V / 20 ohm100V / 41 ohm
• Input sensitivity:Microphone balanced XLR, 4mVLine RCA 500mV
• Pre-Out: Line output level 650mV
• Frequency response: 50Hz - 18Khz, + / - 2dB. At -3dB rated power
• Noise floor: 8mV at 100V output
• THD (at -3dB rate power): Less than 0.5%
• Tone control: Bass 100Hz + - 10dB, Treble 10kHz + - 10dB
• Control: Input level, tone control, master level, VOX
• VOX: CH 1 has priority over CH2, 3, 4. (AFL)
• Phantom power: 48V at CH 1 MIC XLR
• Cooling: Fan cooling, Thermal control
• Protection: Thermal protected at 95 degrees, muted input, short circuit, overload
• Level meter: LED meter, range -24dB / 0dB
• Size (mm): 485 x 88 x 315
• Weight KG (Net): 11