Soundtube 5.25" coax weather extreme - Dante Surface Mount IP Speaker

The IPD-SM52-EZ-II is a Dante-enabled, digital end-point solution in a surface-mount loud speaker. This speaker includes a 40 W PoE amplifier for simplified installation and set up. Driver components consists of one 5.25 inch polypropylene woofer and one 1.0 inch soft dome tweeter in a ported enclosure. The included pre-mountable surface-mount bracket allows for quick and easy installation and the powder-coated aluminium grille keep the speaker looking good in most environments. The system is UL 60065 approved. Included accessories: Safety cable, wall mount bracket, conduit connector and optional port plug.

• Manufacturer's Category: STNet IP-Addressable and Dante Series
• Height: 11.88 in / 301.75 mm
• Width/Diameter: 7.5 in / 190.5 mm
• Shipping Weight: 9.4 lbs / 4.26 kg
• Carton Height: 12 in / 304.8 mm
• Carton Length: 15 in / 381 mm
• Carton Width: 10.5 in / 266.7 mm
• Certifications: CE, IP65, RoHS, UL60065
• Enclosure Properties: High Impact Polystyrene
• Included Accessories: Mounting Assembly, Mounting Hardware, Port Plug, Safety Cable
• Optional Accessories: Black Surface Mount Bracket (AC-SMB-SM52-SS-BK)
• Source Inputs: RJ45 Ethernet Port
• Coverage Angle (ñ6dB @ 2kHz): 91ø Horizontal / 120ø Vertical
• Crossover Frequency: 3.5 kHz
• Directivity Factor (Q) (Averaged 100Hz - 10kHz, @ 2kHz): 6.9 and 5.9
• Directivity Index (DI) dB (Averaged 100Hz - 10kHz, @ 2kHz): 5.2 and 7.7
• Frequency Response (ñ 10 dB): 55 Hz - 20 kHz | Sealed: 62 Hz - 20 kHz
• Frequency Response (ñ 3 dB): 65 Hz - 20 kHz | Sealed: 80 Hz - 20 kHz
• Grille Properties: Aluminium, Powder-Coated
• Low Frequency Voice Coil: 1.0 in / 25.4 mm
• Low Pass Crossover: 12 dB per octave, 2nd order
• Max SPL @ 1M: 97 dB
• Network Type: High Pass: 12 dB per octave, 2nd order
• Tweeter Driver: 1" Soft Dome
• Woofer Driver: 5.25" Polypropylene Cone w/ Butyl Rubber Surround