Power Distributor

The PD-6359A is a device that supplies power and controls Inter-M 6000 system.

By using the sequential power control function, you can adjust the output time of AC power and automatically switch to DC 24V power supply in case of emergency such as blackout or fire.

RACK SYSTEM POWER CONTROL: It controls the power of the rack system.

AC OUTLET TERMINAL: It being consisted of UNSWITCHED 1 group and SWITCHED 3 group, and SWITCHED 3 group can output AC power sequentially. (By using the BY PASS setting switch, the time of AC power output can be controlled sequentially.)

SUPPLY EMERGENCY POWER (DC 24V): It can supply the battery power to the unswitched power output terminal, so it will be switched to emergency power in case of black out to supply the DC power to the system.

MONITORING OF VOLTAGE SUPPLYING STATUS: The status of service voltage can be monitored through Windows program.

REMOTE CONTROL: Power can be on/off from Windows program, and it can be controlled through the contact of remote terminal without PC.

AC/DC VOLT METER: The status of service voltage can be monitored through front LED display consisting.

SMPS POWER SUPPLY CIRCUIT: With stable SMPS power supply circuit, it is low weight.

• AC/DC Output:
  AC:
  SWITCHED: 15A, 3Group (3 Group × 3= 9 channel)
  UNSWITCHED: 3A, 1Group (2 channel)
  DC:
  UNSWITCHED: 1 channel (24V, 5A Max)
  EMERGENCY: 1 channel (24V, 5A Max)
  AMP ONLY: 9 channel (24V, 25A Max)
  RACK ONLY: 4 channel (24V, 5A Max)
• Sequential Power Delay: BYPASS ~ 2 sec (0.5 step)
• Communication: RS-485
• Operation Temperature: -10℃ ~ 40℃
• Power Source: AC 220-240V, 50/60Hz
• Power Consumption: 5.8kW
• Weight (SET): 5.8kg/12.8lb
• Dimensions (SET): 482(W)×132(H)×280(D)mm / 18.98(W)×5.20(H)×11.02(D)in