Installation specific high performance 2-way passive line array loudspeaker

The compact Yi12 line array loudspeaker is designed for use in vertical columns. The 2-way passive design features two 8” drivers in a dipole arrangement and a centrally mounted 1.4” compression driver with a wave transformer. The Yi12 is the installation version of the Y12 loudspeaker and differs only in cabinet construction, finish and mounting hardware. Sophisticated horn geometry combined with the advanced bass-reflex port design delivers full bandwidth capabilities with an extended LF output. These high performance line array modules offer 120° horizontal directivity controlled down to 500 Hz. The mechanical and acoustical design enables vertical arrays of up to twenty four loudspeakers with vertical splay angles from 0° to 14° with a 1° resolution. It can be used in columns of purely Yi12 loudspeakers or combined with Yi8 and/or Yi-SUB cabinets. The loudspeaker cabinet is constructed from marine plywood and has an impact resistant paint finish, whilst Weather Resistant and Special Colour versions are available. The front of the loudspeaker cabinet is protected by a rigid metal grill backed by an acoustically transparent foam. Three point rigging hardware is integrated into the loudspeaker enclosure.

Amplifiers

The following amplifiers can be used to drive the Yi12:

• Installation: 10D, 30D, 40D

Features

• Components: 2 x 8"/1.4"
• Dispersion: 120°
• SPLmax: 139 dB
• Weight: 20 kg / 44 lb

Specifications

• Frequency response (-5 dB standard): 54 Hz - 19 kHz
• Frequency response (-5 dB CUT mode): 100 Hz - 19 kHz
• Max. sound pressure [1]:
  with 10D: 134 dB
  with D20/30D: 137 dB
  with D40/D80/40D: 139 dB
• Cabinets per amplifier channel: 2

• Configuration: Installation specific high performance 2-way passive line array loudspeaker
• Nominal impedance: 8 Ω
• Power handling capacity (RMS/peak 10 ms): 400/1600 W
• Nominal dispersion angle (horizontal): 120°
• Splay angle settings: 0° - 14° (1° increment)
• Components:
  2 x 8" driver with neodymium magnet
  1.4" exit compression driver
  passive crossover network
• Connections: 2 x NL4
  screw terminal block

• Dimensions (H x W x D): 257 x 630 x 375 mm / 10 x 24.8 x 14.8"
• Weight: 20 kg / 44 lb